UK cod digestion vials with cap

CPI International manufactures superior quality COD Vials designed to provide consistent and reliable results during the analytical process. These vials are contained in spectrally uniform 16mm glass cells that fit exactly into your COD reactor. Ensure quality in your application as our COD vials are verified for compliance against NIST standards.

Product code: HC-2125815. Material Description: COD DIGESTION VIAL, LR HW PK/150. For determination of low range Chemical Oxygen Demand (COD) by the Reactor Digestion method. US EPA approved for wastewater analysis using Hach Method 8000. Range: 3-150 mg/L COD.

The COD test is used to predict the requirement an effluent will have for oxygen and hence the effluent's likely impact on the aquatic life of the receiving water course. Camlab water COD can be measured in three ranges. LR (3-150 mg/l) is applicable for final effluents and treated waste water. MR (20-1500 mg/l) is suitable for measuring crude

Description. It consist of solid aluminium block with provision for heating vials and tubes. Uniform heating is achieved and can serve the purpose to function as solid block heater or dry block heater. Ideally suited for COD digestion and other similar digestions. Accomodates 25

LaMotte. systems to test 0-150 ppm, 0-1,500 ppm or 0-15,000 ppm COD. Each package contains 25 vials with Teflon®-lined caps to offer the maximum level of safety during use. High grade, optical quality, standard size (16mm) vials are protected in a premium EPS foam shipper for full compliance.

For Use With (Equipment) Standard COD reactor and spectrophotometer. Includes. 16mm vial with 1.5mL digestion solution, 3.5mL catalyst solution, and screw cap. View More Specs. Includes: 16mm vial with 1.5mL digestion solution, 3.5mL catalyst solution, and screw cap. Products 4. Description. Specifications.

BRAND ® centrifuge tubes capacity 160 mL. pricing. BR114840. BRAND ® cryogenic tube with screw cap capacity 1.2 mL, Internal thread, self-standing. pricing. BR114844. BRAND ® cryogenic tube with screw cap capacity 4 mL, with internal thread self-standing, self-standing. pricing. BR114830.

High quality COD reagent vial factory 5ml 10ml 15ml 20ml 30ml 50ml Test Tube COD Glass Vial with Screw cap and septa US $0.04-$0.15 / Piece 100 Pieces (Min. Order)

7. Hold the vials by the cap, over a sink. Invert gently several times to mix. The vials get very hot during mixing. 8. Put the vials in the preheated DRB200 reactor. Close the lid. 9. Heat the vials

AccuSPEC COD Digestion Tubes. AccuSPEC CODTubes are: · Fully compatible with EPA 410.4 and Standard Methods 5220 · Available in three ranges (0-150ppm, 0-1500ppm and 0-15,000ppm) · Compatible with standard reactors and spectrophotometers. AccuSPEC CODDigestion Tubes use standard 16 mm tubes that have been prefilled with the digestion reagent.

Chemical Oxygen Demand (COD) Analysis. The Chemical Oxygen Demand (COD) of water is determined by dichromate method after digestion. VWR offers 2 solutions to measure COD

No Difference. CHEMetrics® COD Vials can be used directly with any Hach® factory-programmed instrument calibrations, at savings of up to 35%! See our Performance Data Report showing CHEMetrics COD Vial performance in Hach† instrumentation. USEPA-accepted for wastewater analysis. Lower cost per test - save up to 35%.

Each lot is tested to ensure superior quality from the cap and vial to the chemical contents. Glass vials are 16 mm x 100 mm to work with your existing COD reactor and spectrophotometer. Simply add 2 mL of your sample, heat in your digestor, and read in your spectrometer.

Chemical and biological oxygen demand are used extensively in the waste water industry to measure the amount of organic compounds in waste water. Lovibond - MultiDirect Multiparameter Colorimeter. COD Disposal 205L Drum only - With Plastic Clip Top only. Hach LCK714 13mm COD Vials 100 -