Cheap cod digestion vials for measuring water quality

COD Meter is designed for analysis of Chemical oxygen demand for underground water, surface water, Industrial & wastewater. This Instrument is all in one Yatherm New model for measuring multi parameters in water quality detection like COD, Ammonia, Total Phosphorus, Total Nitrogen & permanganate.

HI83314 is a compact, multiparameter photometer for measuring key water and wastewater quality parameters. The meter is one of the most advanced photometers available with an innovative optical design that utilizes a reference detector and focusing lens to eliminate errors from changes in the light source and from imperfections in the glass cuvette. 10 key water and wastewater quality

COD Dissolved Oxygen Hardness Nitrate Nitrogen pH Phosphorus Silica Sodium Solids (TDS, TSS) TOC Turbidity Applications Aquaculture Cooling Water and Boiler Water Desalination Industrial Wastewater High-purity and Ultra-pure Water (UPW) Industries

The chemical oxygen demand value will be read in mg/L for both total COD (tCOD) and soluble COD (sCOD). For samples with a concentration of 0 to 150 mg/L, use the low range COD vials. For higher

Specifications. Description. Three measurement ranges to satisfy each need, COD levels vary depending on the application and process measuring points, HANNA offers reagents to cover three separate ranges. Simply choose the best range for your application: low range: 0 to 150 mg/L O2. medium range: 0 to 1500 mg/L O2. high range: 0 to 15000 mg/L O2.

This measuring station from AQUALYTIC® allows the accurate, rapid, and economical determination of waste water COD levels (Chemical Oxygen Demand). Includes a COD photometer, 25 tube tests covering lower measuring ranges, a reactor block for sample digestion and a tube stand. Photometer specifications. Range: 0 bis 15.000 mg/L.

28/6/2012 · Jun 28 2012. CHEMetrics (USA) announces the availability of a new test kit for the determination of Total Phosphate in wastewater. Control and monitoring of phosphate concentrations in wastewater are critical before water is released back into the environment. Based on USEPA Methods 365.2 and 365.4 (1983), the test employs the persulfate

The AL125 reactor is fitted with 24 holes for 16 mm diameter vials. Specifications. Power supply: 230V/50-60 Hz. Power: 550 W. Dimensions 248 x 219 x 171 mm. Weight: 3.9 kg. COD measuring station AL200 COD VARIO. Instrument supplied in carrying case, 4 batteries (AA), adapter for round vials diam. 16 mm, 2 sets of tube tests 0-150 mg/l, 0-1500

Hach Company COD Digestion Vials, High Range Plus, 200 to 15,000 mg/L COD, pk/150 For determination of Chemical Oxygen Demand (COD) by the Reactor Digestion

COD Analysis Kits. CHEMetrics. USEPA-approved Mercury-free COD kits CHEMetrics’ leakproof reagent vials contain premeasured solutions of sulfuric acids and potassium dichromate. To perform the COD determination, the analyst simply removes the Teflon® lined screw cap from the vial, adds sample to the vial,

Aijiren is a supplier of 2ml hplc vials. Our factory specializes in the production of hplc vials for chromatography. We use good raw materials to make vials and sell them at a cheap price while ensuring quality. Aijiren’s high quality and low price have satisfied many

COD is most suitable for rapid and frequent monitoring of treatment plant efficiency and water quality. This method is more accurate than BOD (with a 5-10% relative standard deviation) and it offers a relatively short analysis time (2-hour digestion time), compared to the 5-day BOD test.

COD is most suitable for rapid and frequent monitoring of treatment plant efficiency and water quality. This method is more accurate than BOD (with a 5-10% relative standard deviation) and it offers a relatively short analysis time (2-hour digestion time), compared to the 5-day BOD test.

The determination of Chemical Oxygen Demand (COD) is widely used in municipal and industrial laboratories to measure the overall level of organic contamination in wastewater. The contamination level is determined by measuring the equivalent amount of oxygen required to oxidize organic matter in the sample. CHEMetrics offers two dichromate reactor digestion methods for fast, easy, safe

Camlab water COD can be measured in three ranges. LR (3-150 mg/l) is applicable for final effluents and treated waste water. MR (20-1500 mg/l) is suitable for measuring crude sewages, untreated and partially treated waste water. HR (200-15000) is suitable for monitoring trade effluents. Please note a reactor is required for COD sample digestion.