10mL cod reagent vials for water analysis

Our ultra-pure reagents for trace analysis in environmental, water and food are produced through sub-boiling distillation. Reagents fulfilling ACS, ISO, Ph.Eur. and USP requirements We provide the defined purity demanded by international regulations for pharmaceutical quality control.

Government regulation Many governments impose strict regulations regarding the maximum chemical oxygen demand allowed in waste water before they can be returned to the environment. For example, in Switzerland, a maximum oxygen demand between 200 and 1000 mg/L must be reached before waste water or industrial water can be returned to the environment .

Digestion Vials found in: COD Digestion Vials, Lead TNTplus Vial Test, COD Digestion Vial, Hr Hw, COD2 Digestion Vials, Dichromate, Digestion Reagent Tubes.. Designed to fit our SC150 HotBlock for 100mL samples, this 125mL volume wide-mouth digestion vessel is supplied with a 48mm screw cap. vessel is supplied with a 48mm screw cap.

Table of Contents Denotes USEPA accepted or approved for water or wastewater analysis. Table of Contents 2800TOC.fm Page 5 Method 8155 Salicylate Method Powder Pillows (0.01 to 0.50 mg/L NH3–N) Nitrogen, Ammonia Method 8038 Nessler Method (0.02 to 2.50 mg/L NH3–N)

FerroVer® total iron reagent, AccuVac® Vials, pk/25 Hach Method 8008, 1,10 phenanthroline USEPA approved for reporting wastewater analysis results Range: up to 3.00 mg/L (0-5 mg/L with Pocket Colorimeter II 5870022, 0-10 mg/L with AccuVac

2020/7/16 · As water-based industries continue to expand and evolve, the need for water analysis grows with them. Click to read more Chemical oxygen demand (COD) reagent vials for measuring water quality Curiosity is the fundamental source of science. ...

Vials are packaged in 25-, 100- and 150-count boxes to meet your testing frequency. First time buyers, receive a 25% discount on your first order of COD reagent vials, ask for the Water Online discount. CHEMetrics produces test kits and instruments for

Plastic Screw Cap 16mm test tube is also called COD vials, which are mainly used for water analysis. There are 8ml, 10ml, 12ml, 15ml test tubes for water analysis in AIJIREN. COD test tube can compatible with Digestion System.

Alibaba COD reagent vials factory from China. Material: USP Type 1, Class A, 33 Borosilicate Glass Application: Water analysis Qty/Pack: 25pcs/pack or 100pcs/pack Dimensions: 16 x 100mm Neck Diameter: 16mm Volume: 12ml Payment: T/T MOQ: 1 pack. Tel: 008618057059123.

2.Available with amber or clear vial 3.Available with 20ml or 10ml vial Features 1) Screw top vials and caps are recommended for the tightest seal and the most reproducibleheadspace results. 2) CombiPAL headspace vials and caps are precision-thread, making

Automatically Avoids Errors with RFID technology and TNTplus reagent vials More than 250 pre-programmed water analysis methods Integrated QA software package for scheduling, documenting and interpreting quality measurements DR 3900

The CHEMetrics COD System 4 4 4 4 COD Reagent Vials Kit (USEPA-accepted and Mercury-free) Digestor Block (holds 12 vials) Photometer (single or multi-analyte) Calibration Standards (1000 and 10,000 ppm)

5.0 REAGENTS 5.1 ASTM Type II water (ASTM D1193): Water should be monitored for impurities. 5.2 Conditioning reagent: Slowly add 30 mL concentrated HCl to 300 mL Type II water, 100 mL 95% ethanol or isopropanol, and 75 g NaCl in solution in 5.3

Charles River has developed and optimized a range of quantitative and qualitative LAL reagent water formulations that provides increased sensitivity, greater linearity, and superior interference resistance. Our LAL testing instruments and reagents are licensed by the FDA for product release, and all of our accessory products are certified for the appropriate LAL testing requirements.